How to Properly Use a Pressure Washer

Before beginning pressure washing residential property, it is necessary to get rid of debris, stains, and grease that are already on the surface and in walls. Think of removing and preventing buildup by using a strong detergent.Pressure Washing will give some tips on how to start.

Some commercial cleaners may strip the color or dry out vinyl siding, brick walls and windows, wooden decking, and vinyl window sills, leaving unsightly and dirty streaks in the finish. When cleaning commercial property, make sure that the cleanser or detergent is non-toxic. Also, be sure to rinse any spills immediately and to not allow them to set. Professional pressure washing services should always be able to advise you of the proper procedures for pressure washing residential property.

Once a home or business has been cleaned and all debris removed, the next step is to begin pressure washing residential property. It is important to wear a mask when working on residential property because fumes from detergents, solvents, cleaning solutions and cleaning equipment can be harmful to the eyes.

There are many different types of cleaning supplies and equipment for residential and commercial property, but the most common is a pressure washer. Pressure washers work by spraying a jet of water onto the surface, sometimes in multiple passes, to remove dirt, grime, grease, stains, and stains from the material being cleaned.

When working on residential property, it is important to know the recommended water pressure for the area. Most homeowners find that a two-inch line is adequate for most homes and offices. For larger areas, including commercial buildings, larger lines will help to reach all areas of the building, especially where large areas may be required to be cleaned.

The next step in cleaning residential property is the preparation of the surface that the pressure washer will be used on. Most often, this is done using a mild detergent. Cleaning supplies such as soap, water, a cloth, or a sponge are used to remove stains and dirt before beginning the actual cleaning process.

After cleaning surfaces on residential property, a primer coating is applied. This will help to protect the surface and prevent future damage from future stains and dirt and accidents. Primer should be applied before pressure washing the surface to ensure that no new build up will occur. If there is any existing debris or dirt present, it is removed prior to pressure washing. It is also important to rinse off the primer prior to applying the next coat of detergent.

After the primer is dry, it is time to place the pressure washer nozzle into the pressure washer. To prevent any water from being wasted, it is recommended that no more than twenty-five pounds of water to be used for a one pound area. It is also important to read the instructions provided by the manufacturer. Be careful, because some manufacturers recommend the opposite but using less water will ensure that any residue that is still left on the surface can be washed off easily.

Before beginning the actual cleaning process, it is important to use a washer wash cloth to remove any excess water that has been spilled during the cleaning process. Once the wash cloth has dried, a brush with a high quality non-slip brush attachment can be used to clean the surface. Again, be careful when scrubbing, as excessive pressure can cause small puddles to form on the surface, making it more difficult to clean up.

Once the clean surface has been cleaned, it is important to allow the surface time to air out before proceeding. Any items that could have gotten trapped in the wet areas can be vacuumed up. or removed with a vacuum cleaner, but do not use the vacuum cleaner directly on the surface.

When using pressure washing on commercial property, it is often required that the homeowner or manager has a pressure washer tank, and hose, as well as a power supply, such as a water supply, as part of the service contract. This is so that the process can be completed properly.

Many commercial properties may be smaller in size and thus require more attention to detail. If the pressure washer and hose are purchased at the same time, it can be a good idea to get a kit and supply for each property.